X.L.T. International Electronics Co., Limited
Main products:Automatic Tape Dispenser, Automatic Screw Feeder, Soldering Station, Solder Feeder with Cutter
Contact Us
  • Contact Person : Mr. Lau Mike
  • Company Name : X.L.T. International Electronics Co., Limited
  • Tel : 86-755-27996485
  • Fax : 86-755-28028685
  • Address : Guangdong,Shenzhen,Block 5, Foreign Trade Industrial Park, Guanlan Town, Baoan District,
  • Country/Region : China
  • Zip : 518110

C8 semi-automatic digital soldering station

C8 semi-automatic digital soldering station
Product Detailed
SMTechnology C8 semi-automatic digital soldering station Self solder wire feeding Solder dia. 0.5/0.6/0.8/1.0/1.2/1.5/1.6mm

SMTechnology C8 semi-automatic digital soldering station 

Fixed the soldering tips on the machine,it can feeder soldering to the head of the soldering tips automatically(no need one hand with solder,anther hand hold solder handle)so this permit operator hold the solder equipment with two hands

Footswitch control solder feeder


Out put voltageAC110V/50hz AC220V/60hz
Consumption power95W
Heater powerAC24v 80W
Motor powerDC24V 65mA
solder feeder speed3mm/s-30mm/s
solder feeder time0.00s-65.00s
solder back time0.00s-6.00s
Transport modelAuto/Manual
Temp. range150-450°C
solder back time0.00s-6.00s
Temperature stability±1°C
Sleeping time1-60min
Sleeping temp.range50°C-below the setted temp.
The potential between tips and groundingbetween 2mv
The resistance between tips and groundingbetween 2mΩ
Solder Dia0.5/0.6/0.8/1.0/1.2/1.5/1.6mm


Two ways of soldering feeding

a,Auto soldering feeder:open the machine,fixed solder wire length,cycle operation

b,Manual soldering feeding:press the switch to feeder solder,loose switch to stop solder feeding

Freely set solder feeding length(under Auto model,achieved by setting solder feeding time)

Freely set soldering feeding speed,quick or slow as requirmennt

Feeding solder position can rotate to aleatoric angle of the solder tip

Nose(soldering tips)angle adjustable

Installment way

Split-type assemble way:Nose install on the working station,controller assemble in the other suitable place.

Intergrated soldering body assemble way:connect Nose and controller together(factory out install way)

Solder anti-splash function

Punch cut on the solder can decrease the splash during soldering. Note: solder tube option as per solder wire

Application way

Soldering application range:DB head,cable,USB,Communication connector and electric wire.

C8 semi-automatic digital soldering station

Copyright Notice @ 2008-2012 ECOL Limited and/or its subsidiaries and licensors. All rights reserved.